<HTML><HEAD>
<META http-equiv=Content-Type content="text/html; charset=iso-8859-1">
<META content="MSHTML 6.00.2715.400" name=GENERATOR>
<STYLE>
<!--
/* Style Definitions */
p.MsoNormal, li.MsoNormal, div.MsoNormal
        {margin:0in;
        margin-bottom:.0001pt;
        font-size:12.0pt;
        font-family:"Times New Roman";}
a:link, span.MsoHyperlink
        {color:blue;
        text-decoration:underline;}
a:visited, span.MsoHyperlinkFollowed
        {color:purple;
        text-decoration:underline;}
span.EmailStyle17
        {font-family:Arial;
        color:windowtext;}
@page Section1
        {size:8.5in 11.0in;
        margin:1.0in 1.25in 1.0in 1.25in;}
div.Section1
        {page:Section1;}
-->
</STYLE>
</HEAD>
<BODY lang=EN-US vLink=purple link=blue>
<DIV><FONT face="MS Sans Serif" size=2>Use hide glue for a few reasons: It won't soak into the bushing and make it hard, it's easy to remove, it bonds well and quickly, </FONT>it's easy to work with. Yes, add urea to increase the working time so you can do several bushings before you have to lay glue on the cloth again. You will improve adhesion if you lightly coat the inside of the mortise with very thin layer of glue first (use a pipe cleaner for application and run quickly through the whole set of keys). PVC-E isn't the right stuff.</DIV>
<DIV> </DIV>
<DIV><FONT face="MS Sans Serif" size=2>
<DIV>David Love</DIV>
<DIV><A href="mailto:davidlovepianos@earthlink.net">davidlovepianos@earthlink.net</A></DIV>
<DIV> </DIV></FONT></DIV>
<DIV> </DIV>
<BLOCKQUOTE style="PADDING-RIGHT: 0px; PADDING-LEFT: 5px; MARGIN-LEFT: 5px; BORDER-LEFT: #000000 2px solid">
<DIV style="FONT: 10pt Arial">----- Original Message ----- </DIV>
<DIV style="BACKGROUND: #e4e4e4; FONT: 10pt arial; font-color: black"><B>From:</B> <A title=tomtuner@attbi.com href="mailto:tomtuner@attbi.com">Tom Driscoll</A> </DIV>
<DIV style="FONT: 10pt arial"><B>To: </B><A title=pianotech@ptg.org href="mailto:pianotech@ptg.org">pianotech@ptg.org</A></DIV>
<DIV style="FONT: 10pt arial"><B>Sent:</B> 6/21/2003 9:00:06 PM </DIV>
<DIV style="FONT: 10pt arial"><B>Subject:</B> key bushing removal- choice of glue</DIV>
<DIV><BR></DIV><FONT size=2>
<DIV class=Section1>
<P class=MsoNormal><FONT face=Arial size=2><SPAN style="FONT-SIZE: 10pt; FONT-FAMILY: Arial">List,</SPAN></FONT></P>
<P class=MsoNormal><FONT face=Arial size=2><SPAN style="FONT-SIZE: 10pt; FONT-FAMILY: Arial"> Part 1</SPAN></FONT></P>
<P class=MsoNormal style="TEXT-INDENT: 0.5in"><FONT face=Arial size=2><SPAN style="FONT-SIZE: 10pt; FONT-FAMILY: Arial">Most of my key rebushing jobs have been on older keys and steam removed the old bushings easily.</SPAN></FONT></P>
<P class=MsoNormal><FONT face=Arial size=2><SPAN style="FONT-SIZE: 10pt; FONT-FAMILY: Arial"> Tomorrows job will be on a mid 80’s Young –Chang and I’m not sure what type glue was used.</SPAN></FONT></P>
<P class=MsoNormal><FONT face=Arial size=2><SPAN style="FONT-SIZE: 10pt; FONT-FAMILY: Arial"> I searched the archives and read of Wallpaper remover,steam , or soaking bushings with an ammonia solution. I read that the wallpaper remover can inhibit adhesion on rebush. </SPAN></FONT></P>
<P class=MsoNormal><FONT face=Arial size=2><SPAN style="FONT-SIZE: 10pt; FONT-FAMILY: Arial"> Any tips appreciated.</SPAN></FONT></P>
<P class=MsoNormal><FONT face=Arial size=2><SPAN style="FONT-SIZE: 10pt; FONT-FAMILY: Arial"> Part 2. </SPAN></FONT></P>
<P class=MsoNormal><FONT face=Arial size=2><SPAN style="FONT-SIZE: 10pt; FONT-FAMILY: Arial"> Pvc-E ? For rebush?</SPAN></FONT></P>
<P class=MsoNormal><FONT face=Arial size=2><SPAN style="FONT-SIZE: 10pt; FONT-FAMILY: Arial"> Back to the future with animal hide glue?</SPAN></FONT></P>
<P class=MsoNormal style="TEXT-INDENT: 0.5in"><FONT face=Arial size=2><SPAN style="FONT-SIZE: 10pt; FONT-FAMILY: Arial"> I confess that my glue pot has spider webs in it </SPAN></FONT></P>
<P class=MsoNormal><FONT face=Arial size=2><SPAN style="FONT-SIZE: 10pt; FONT-FAMILY: Arial"> I’ll be dead when these have to be removed again, but I’m leaning toward hide glue because I care about the next tech. That’s just the kind of guy I am. </SPAN></FONT></P>
<P class=MsoNormal><FONT face=Arial size=2><SPAN style="FONT-SIZE: 10pt; FONT-FAMILY: Arial"> Should I add urea to the mix? The ratio suggested was ½ tsp to 1 tablespoon granules.</SPAN></FONT></P>
<P class=MsoNormal><FONT face=Arial size=2><SPAN style="FONT-SIZE: 10pt; FONT-FAMILY: Arial"> </SPAN></FONT></P>
<P class=MsoNormal><FONT face=Arial size=2><SPAN style="FONT-SIZE: 10pt; FONT-FAMILY: Arial"> Joe Garrett, Don’t get mad, but what’s the word on PVC-E? Will I be creating a problem for the aforementioned future tech, or can it be dissolved easily?</SPAN></FONT></P>
<P class=MsoNormal><FONT face=Arial size=2><SPAN style="FONT-SIZE: 10pt; FONT-FAMILY: Arial"> Awaiting advice with appreciation</SPAN></FONT></P>
<P class=MsoNormal><FONT face=Arial size=2><SPAN style="FONT-SIZE: 10pt; FONT-FAMILY: Arial"> Tom Driscoll</SPAN></FONT></P>
<P class=MsoNormal><FONT face=Arial size=2><SPAN style="FONT-SIZE: 10pt; FONT-FAMILY: Arial"> </SPAN></FONT></P>
<P class=MsoNormal><FONT face=Arial size=2><SPAN style="FONT-SIZE: 10pt; FONT-FAMILY: Arial"> P.S. I don’t look to the archives as often as I should, but that’s where </SPAN></FONT><FONT face=Arial size=2><SPAN style="FONT-SIZE: 10pt; FONT-FAMILY: Arial">Newton</SPAN></FONT><FONT face=Arial size=2><SPAN style="FONT-SIZE: 10pt; FONT-FAMILY: Arial"> lives ,still helping us along our way.</SPAN></FONT></P>
<P class=MsoNormal><FONT face=Arial size=2><SPAN style="FONT-SIZE: 10pt; FONT-FAMILY: Arial"> </SPAN></FONT></P>
<P class=MsoNormal><FONT face=Arial size=2><SPAN style="FONT-SIZE: 10pt; FONT-FAMILY: Arial"> </SPAN></FONT></P></DIV></FONT></BLOCKQUOTE></BODY></HTML>