<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN"> <HTML><HEAD> <META http-equiv=Content-Type content="text/html; = charset=iso-8859-1"> <META content="MSHTML 6.00.2800.1400" name=GENERATOR> <STYLE></STYLE> </HEAD> <BODY bgColor=#d8d0c8> <DIV><FONT style="BACKGROUND-COLOR: #d8d0c8">Hi,</FONT></DIV> <DIV><FONT style="BACKGROUND-COLOR: #d8d0c8"></FONT> </DIV> <DIV><FONT style="BACKGROUND-COLOR: #d8d0c8">We're working on a 6'4" = Chickering grand from the 1900's.  A handful of the brass hammer flanges have = cracks right at the groove that holds the center pin (see attached = photos).  What's the best way to repair this?  Is it possible to find = replacement flanges?  The end of the rep lever has a curve in it to match the = drop screw of the flange, so I wonder if it's possible to replace hammers, = shanks, and flanges as a unit without affecting the wips, too.</FONT></DIV> <DIV><FONT style="BACKGROUND-COLOR: #d8d0c8"></FONT> </DIV> <DIV><FONT style="BACKGROUND-COLOR: #d8d0c8">Thanks,</FONT></DIV> <DIV><FONT style="BACKGROUND-COLOR: #d8d0c8"></FONT> </DIV> <DIV><FONT style="BACKGROUND-COLOR: #d8d0c8">--Cy = Shuster--</FONT></DIV> <DIV><FONT style="BACKGROUND-COLOR: #d8d0c8">Rochester, = MN</FONT></DIV> <DIV> </DIV></BODY></HTML>