<HTML><HEAD> <META charset=US-ASCII http-equiv=Content-Type content="text/html; cha= rset=US-ASCII"> <META content="MSHTML 6.00.2800.1458" name=GENERATOR></HEAD> <BODY style="FONT-SIZE: 12pt; FONT-FAMILY: Arial; BACKGROUND-COLOR: #fffff= f"> <DIV>Hello David,</DIV> <DIV> </DIV> <DIV>    I suppose you could regulate the drop</DIV> <DIV>by bending the spoon.  But I would suggest</DIV> <DIV>you use the screw adjustment instead.</DIV> <DIV>  </DIV> <DIV>  You will find the adjustment point at the top </DIV> <DIV>of the flange thru the window just behind the </DIV> <DIV>center pin.  If you will look straight down at </DIV> <DIV>the top of the flange you will see it.</DIV> <DIV> </DIV> <DIV> Regulate this action exactly like a  (regular)</DIV> <DIV>action.  While it looks different it works the </DIV> <DIV>same and just as well.</DIV> <DIV> </DIV> <DIV> BTW  there are three different   Brambachs.</DIV> <DIV>The 5'3' is  their best scale.</DIV> <DIV> </DIV> <DIV>Regards,</DIV> <DIV> </DIV> <DIV>Jack Wyatt</DIV></BODY></HTML>