<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META http-equiv=Content-Type content="text/html; =
charset=iso-8859-1">
<META content="MSHTML 6.00.2900.2802" name=GENERATOR>
<STYLE></STYLE>
</HEAD>
<BODY bgColor=#ffffff>
<DIV><FONT face=Arial size=2>
<DIV>This is the one he wants, David. I got mine a million years =
ago from
Tuners' Supply. It's a Hale tool.</DIV>
<DIV>The picture doesn't do the far end justice--and I still had to =
grind
the sides to get it to work satisfactorily.</DIV>
<DIV> </DIV>
<DIV>Barbara Richmond, RPT</DIV>
<DIV> </DIV>
<DIV>----- Original Message -----
<DIV>From: "Cy Shuster" <<A
href="mailto:741662027@theshusters.org">741662027@theshusters.org</A>&g=
t;</DIV>
<DIV>To: "An open list for piano technicians" <<A
href="mailto:pianotech@ptg.org">pianotech@ptg.org</A>></DIV>
<DIV>Sent: Wednesday, January 11, 2006 5:02 AM</DIV>
<DIV>Subject: Re: Looking for certain tools</DIV></DIV>
<DIV><BR></DIV>> Between the two parallel faces, instead of a curve, =
there
are two, shorter <BR>> angled faces, that fit those angles on the =
capstan as
you push in. It's <BR>> still open, not a box wrench.<BR>> =
<BR>>
--Cy--<BR>> <BR>> ----- Original Message ----- <BR>> From: =
"David
Ilvedson" <<A
href="mailto:ilvey@sbcglobal.net">ilvey@sbcglobal.net</A>><BR>> =
To: <<A
href="mailto:pianotech@ptg.org">pianotech@ptg.org</A>><BR>> =
Sent: Tuesday,
January 10, 2006 11:19 PM<BR>> Subject: Re: Looking for certain =
tools<BR>>
<BR>> <BR>>> I'm not sure how you'd use a four flat faced =
tool...lift
the wippen and <BR>>> slip it over the capstan?...with my U-shaped =
tool, I
just ground down the <BR>>> sides to make it skinnier...no
problems...<BR>>><BR>>> David Ilvedson, RPT<BR>>> =
Pacifica,
California<BR>> <BR>> <BR>>
_______________________________________________<BR>> Pianotech list =
info: <A
href="https://www.moypiano.com/resources/#archives">http://www.ptg.org=
/mailman/listinfo/pianotech</A><BR>></FONT></DIV>
<DIV style="FONT: 10pt arial"><FONT face=Arial
size=2> </DIV></FONT></BODY></HTML>