<html> <body> Do I understand that you will drill and tap the head yourself or it is already done? If you are tapping the hole you drill can you also re thread the shaft? Greg Newell At 11:49 AM 3/17/2003, you wrote: <blockquote type=cite class=cite cite>Hi, If there are any interested I have quite a few tuning lever heads that fit the ( OLD ) Hale tuning hammer. These can be drilled to any degree you order. Joe Goss <a href="mailto:imatunr@srvinet.com">imatunr@srvinet.com</a> <a href="http://www.mothergoosetools.com/" eudora="autourl">www.mothergoosetools.com</a> --- Checked by AVG anti-virus system (<a href="http://www.grisoft.com/" eudora="autourl">http://www.grisoft.com</a>). Version: 6.0.462 / Virus Database: 261 - Release Date: 3/13/2003</blockquote> <x-sigsep></x-sigsep> Greg Newell <a href="mailto:gnewell@ameritech.net" eudora="autourl">mailto:gnewell@ameritech.net</a></body> </html>