<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN"> <HTML><HEAD> <META http-equiv=Content-Type content="text/html; = charset=iso-8859-1"> <META content="MSHTML 6.00.2800.1264" name=GENERATOR> <STYLE></STYLE> </HEAD> <BODY bgColor=#ffffff> <DIV><FONT face=Arial>Dear Woodworking Shop Rats,</FONT></DIV> <DIV><FONT face=Arial></FONT> </DIV> <DIV><FONT face=Arial>I have an ever-present need to cut thin (usually = thin, but any thickness) wooden veneers on my bandsaw. I don't have a = technique for making uniform-thickness cuts that I find satisfactory. How do the more talented/experienced woodworkers do this? What I can envision is a fence = that the saw operator can move along an incremental/indexed rail - a jig that = is real accurate so that you could, for example, just lop off 1.5 mm thick = veneers, one after the other, all the same thickness. But I know of no such jig. = I'm sure there is some basic bandsaw technique I am missing, as I should think = this has been a basic need for many woodworkers for at least since the bandsaw = was invented.</FONT></DIV><FONT face=Arial> <DIV><BR>Thanks for any thoughts. </DIV> <DIV> </DIV> <DIV>Terry Farrell</FONT></DIV></BODY></HTML>