<HTML>In a message dated 7/16/02 9:17:32 AM Central Daylight Time, gnewell@ameritech.net writes: <BLOCKQUOTE TYPE=CITE style="BORDER-LEFT: #0000ff 2px solid; MARGIN-LEFT: 5px; MARGIN-RIGHT: 0px; PADDING-LEFT: 5px">Wim,    A Cherry picker, or engine hoist as Greg Casper correctly pointed out, will most certainly work in your shop. I've seen your shop remember? It will definitely fit through the doors and the long legs are removable on most until you get it where you want it and then put them back on. It will easily fit in your classroom shop and roll right under the piano with the "boom" over the plate for easy and controllable hoisting. As far as the rolling down the side walk and through 3 doors ... it's on wheels. It is exactly what I planned on using if I took the job. You may wish to reconsider. Best, Greg Newell </BLOCKQUOTE> OK, you've pointed out that I could have used an engine hoist. But then there is one more thing that has to be considered. I'M CHEAP. If I can get out of paying for something, by using my head and muscles, I'll do it. And besides, it was a neat experiment, and it worked. Maybe next time, I'll see what's available here in T'loosa. Wim </HTML>