<html>
At 04:51 PM 4/24/2002 -0400, you wrote:<br>
<blockquote type=cite cite><font face="arial" size=2>Hi list, <br>
I went to a Youg Chang today,about 10 years old,for a tuning.I tuned it
once about 3 or 4 years ago.I got there and every hammer was blocking,I'm
not talking about buzzing,but major blocking.I did'nt have enough time to
get into it as I had an appointment conflict.So I'm going back tomorrow
to fix this ,pitch raise ,clean,and tune.(it's a grand with a piano-disc
system).I checked to see if any rails were loose,or might have shifted,is
there anything I should look for,maybe with the player system?I changed
letoff on a few notes,and it quit blocking,but I sure had to twist them a
mile,it has the dowel type.It also has excessive keydip.I guess I should
go through one note and completely regulate,I am just checking to see
if there's something obvious,maybe I've overlooked. <br>
Thanks in advance, <br>
Hazen Bannister</font><font face="arial"> </blockquote><br>
Don't bother making action adjustments unless it is being used. Get
replacement action brackets.<br>
This is a warranty issue, you will be compensated by the man'f'r for
installation of their new parts.</font><br>
<br>
<div>Regards,</div>
<br>
<div>Jon Page, piano technician</div>
<div>Harwich Port, Cape Cod, Mass.</div>
<div><a href="mailto:jonpage@attbi.com" EUDORA=AUTOURL>mailto:jonpage@attbi.com</a></div>
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
</html>