<HTML>In a message dated 3/28/2003 11:29:49 PM Pacific Stand= ard Time, Piannaman@aol.com writes: <BLOCKQUOTE TYPE=CITE style="BORDER-LEFT: #0000ff 2px solid; MARGIN-LEFT= : 5px; MARGIN-RIGHT: 0px; PADDING-LEFT: 5px"> the jack-stop rail is directly= above he eyelets for the regulating buttons.  There is NO room to get = the regulating tool in there. </BLOCKQUOTE> Dave, Sounds like a great annoyance, and as others have mentioned, some great old = American grands also suffered from this. Where you can't bend hangers, or do= n't want to remove the rail: for touchup adjustments, I've gotten pretty fas= t with needle-nose pliers. When the eye is facing me, I insert one jaw (usua= lly one, sometimes two; depends on the size of the eye and the pliers) to tu= rn it. When the eye is sideways, I just grab the adjustment screw between th= e jaws and turn. It's at least as fast as the adjusting the dowel-type letof= f thingies. Bob Davis </HTML>