<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN"> <HTML><HEAD> <META http-equiv=Content-Type content="text/html; = charset=iso-8859-1"> <META content="MSHTML 6.00.2800.1458" name=GENERATOR> <STYLE></STYLE> </HEAD> <BODY bgColor=#ffffff> <DIV><FONT face=Arial size=2>I recommend using a tilter for this = operation. However, you need to have the appropriate clamps. These clamps need to = be pipe clamps with the extension jaws, so that you can put the clamp under the = tilter frame and still clamp in the middle of the panel. The reason the piano = has to sit on it's back, is so that the back frame and the panels are aligned = by the frame of the tilter. Of course, sometimes the panel slightly extends = past the posts, so you'll need to put a shim or ? so that proper alignment is accomplished. Because there is still some glue in the orfice, I = recommend epoxy to fill the voids and still get good bonding. (mask off the seam(s) so = that the darned stuff doesn't all run out!<G>) Although, Gorilla glue is = good for some things, it's one of those glues that take forever to get really = "hard". It is flexible! As this is not what you want, the epoxy is a better choice. = Besides, there are some glues it won't stick very well to. Not knowing = the specifics of the original glue used can be a problem. Epoxy sticks to everything! (As we all know!<G>)</FONT></DIV> <DIV><FONT face=Arial size=2>Best Regards,</FONT></DIV> <DIV><FONT face=Arial size=2>Joe Garrett, R.P.T.<BR>Captain, Tool Police<BR>Squares R I</FONT></DIV></BODY></HTML>