<!doctype html public "-//w3c//dtd html 4.0 transitional//en"> <html> <body bgcolor="#FFFFFF"> Kdivad@aol.com wrote: <blockquote TYPE=CITE> <blockquote TYPE=CITE style="BORDER-LEFT: #0000ff 2px solid; MARGIN-LEFT: 5px; MARGIN-RIGHT: 0px; PADDING-LEFT: 5px"> <blockquote TYPE=CITE style="BORDER-LEFT: #0000ff 2px solid; MARGIN-LEFT: 5px; MARGIN-RIGHT: 0px; PADDING-LEFT: 5px">I would rather have my balance rail touching the keybed more than less.</blockquote> I thought that was basically the idea regardless.</blockquote> Thats the difference between glides and no glides, my point is why install glides as they equal less contact between the rail and keybed?</blockquote> Ok, and I am going to go ahead and bed it as is. But it almost sounds like we should be removeing all these glide bolts then instead. Thanks for the good advice, one and all. -- Richard Brekne RPT, N.P.T.F. UiB, Bergen, Norway <A HREF="mailto:rbrekne@broadpark.no">mailto:rbrekne@broadpark.no</A> <A HREF="http://home.broadpark.no/~rbrekne/ricmain.html">http://home.broadpark.no/~rbrekne/ricmain.html</A>   </body> </html>