<!doctype html public "-//W3C//DTD W3 HTML//EN">
<html><head><style type="text/css"><!--
blockquote, dl, ul, ol, li { padding-top: 0 ; padding-bottom: 0 }
--></style><title>Re: Square Action Handle</title></head><body>
<div>At 5:59 AM -0500 6/28/03, Avery Todd wrote:</div>
<blockquote type="cite" cite>I've seen a method of doing this by
drilling two holes in the front of the<br>
keyframe, inserting two screws and using a leather "handle"
of some kind<br>
that can be attached. When one has to pull the action multiple times,
as<br>
in voicing, etc., it would sure come in handy. I don't know the
specifics</blockquote>
<blockquote type="cite" cite>but maybe someone else does.
...</blockquote>
<div><br></div>
<div>Avery,</div>
<div><br></div>
<div>I do this type thing. Except I use two brass pull door handles
instead.</div>
<div><img src="cid:a05111b0abb2376d03db0@[192.168.2.25].1.0">I mount
each one equidistant from the middle of the keyframe and its ends. The
thumbs of your hands can then act as a leverage tool against the front
of the keybed to start bringing the action out for each pull.</div>
<div><br></div>
<div>Very controllable, and after a hundred pulls or so, what a
blessing.</div>
<div><br></div>
<div>The temporary handles are removed after the job is
finished.</div>
<div><br></div>
<div>Keith McGavern</div>
</body>
</html>