<!doctype html public "-//w3c//dtd html 4.0 transitional//en"> <html> For those of you following this project, here is one suggestion for a fully adjustable fold away key magnet assembly. It would be installed in the key between the capstan and balance rail pin. The shank is held in the up position tiny (2mm by 2mm) magnet pair. (see pictures below) <img SRC="cid:part1.3F0F1AD5.DF7E56EC@grieg.uib.no" height=208 width=350><img SRC="cid:part2.3F0F1AD5.DF7E56EC@grieg.uib.no" height=204 width=350> <img SRC="cid:part3.3F0F1AD5.DF7E56EC@grieg.uib.no" height=200 width=350> -- Richard Brekne RPT, N.P.T.F. UiB, Bergen, Norway <A HREF="mailto:rbrekne@broadpark.no">mailto:rbrekne@broadpark.no</A> <A HREF="http://home.broadpark.no/~rbrekne/ricmain.html">http://home.broadpark.no/~rbrekne/ricmain.html</A> <A HREF="http://www.hf.uib.no/grieg/personer/cv_RB.html">http://www.hf.uib.no/grieg/personer/cv_RB.html</A>  </html>