<html>  <head></head> <body>  <DIV></DIV>No, I wish it was... much easier to deal with.<BR> <BLOCKQUOTE style="PADDING-LEFT: 5px; MARGIN-LEFT: 5px; BORDER-LEFT: #1010ff 2px solid">-------------- Original message from "Joe And Penny Goss" <imatunr@srvinet.com>: -------------- <BR><BR> <META content="MSHTML 6.00.2800.1505" name=GENERATOR> <STYLE></STYLE> <DIV><FONT face=Arial size=2>Ohoh. Is this the one with the wood rail with the stickers comming up through it?</FONT></DIV> <DIV><FONT face=Arial size=2>If it is you need 4 or 5 damper heads drilled out to, I think it is 1/8 inch.</FONT></DIV> <DIV><FONT face=Arial size=2>You will capture the wire end of the sticker at the end of each section.</FONT></DIV> <DIV><FONT face=Arial size=2>This one is easy but still look for the brace. It may be a rod.</FONT></DIV> <DIV><FONT face=Arial size=2>Rough setting of lost motion can be done by adjusting the hight of the sticker rail.</FONT></DIV> <DIV><FONT face=Arial size=2>You will want to purchase a 12" long thin 1/8" screwdriver.</FONT></DIV> <DIV>Joe Goss RPT<BR>Mother Goose Tools<BR><A href="mailto:imatunr@srvinet.com">imatunr@srvinet.com</A><BR><A href="http://www.mothergoosetools.com/">www.mothergoosetools.com</A></DIV> <BLOCKQUOTE dir=ltr style="PADDING-RIGHT: 0px; PADDING-LEFT: 5px; MARGIN-LEFT: 5px; BORDER-LEFT: #000000 2px solid; MARGIN-RIGHT: 0px"> <DIV style="FONT: 10pt arial">----- Original Message ----- </DIV> <DIV style="BACKGROUND: #e4e4e4; FONT: 10pt arial; font-color: black"><B>From:</B> <A title=richard.ucci@att.net href="mailto:richard.ucci@att.net">richard.ucci@att.net</A> </DIV> <DIV style="FONT: 10pt arial"><B>To:</B> <A title=pianotech@ptg.org href="mailto:pianotech@ptg.org">pianotech@ptg.org</A> </DIV> <DIV style="FONT: 10pt arial"><B>Sent:</B> Wednesday, August 03, 2005 7:06 PM</DIV> <DIV style="FONT: 10pt arial"><B>Subject:</B> howard spinet</DIV> <DIV><BR></DIV> <DIV>Hi Guys,</DIV> <DIV>Came across a baldwin howard spinet with jack flanges that are comming unglued. I want to pull the action, but it was designed in a way I have yet to see.</DIV> <DIV>Bolted to the plate-no struts, and these long flat metal pieces that are screwed into the wooden platform under the action.</DIV> <DIV>Anything I should be aware of other than the usual stuff? Also , will the pianotek sticker holder work on this model?</DIV> <DIV>Thanks,</DIV> <DIV>RU/UP</DIV></BLOCKQUOTE></BLOCKQUOTE>  </body> </html>