<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META content="text/html; charset=iso-8859-1" =
http-equiv=Content-Type>
<META content="MSHTML 5.00.2919.6307" name=GENERATOR>
<STYLE></STYLE>
</HEAD>
<BODY bgColor=#ffffff>
<DIV>"I use Webb Phillip's LAKEONE Wood Rebuilder.....After the epoxy
dries...."</DIV>
<DIV> </DIV>
<DIV>I have tried this product and have wondered about it's base. You =
mention
epoxy here. It smells exactly like polyester resin. Does anyone know =
what it is
made of or whether it is close to epoxy or polyester?</DIV>
<DIV> </DIV>
<DIV>Terry Farrell<BR>Piano Tuning & Service<BR>Tampa, Florida<BR><A =
href="mailto:mfarrel2@tampabay.rr.com">mfarrel2@tampabay.rr.com</A></DI=
V>
<BLOCKQUOTE
style="BORDER-LEFT: #000000 2px solid; MARGIN-LEFT: 5px; MARGIN-RIGHT: =
0px; PADDING-LEFT: 5px; PADDING-RIGHT: 0px">
<DIV style="FONT: 10pt arial">----- Original Message ----- </DIV>
<DIV
style="BACKGROUND: #e4e4e4; FONT: 10pt arial; font-color: =
black"><B>From:</B>
<A href="mailto:Wimblees@AOL.COM" =
title=Wimblees@AOL.COM>Wimblees@AOL.COM</A>
</DIV>
<DIV style="FONT: 10pt arial"><B>To:</B> <A =
href="mailto:pianotech@ptg.org"
title=pianotech@ptg.org>pianotech@ptg.org</A> </DIV>
<DIV style="FONT: 10pt arial"><B>Sent:</B> Saturday, April 28, 2001 =
5:26
PM</DIV>
<DIV style="FONT: 10pt arial"><B>Subject:</B> Re: Crack fillers - =
old
soundboards</DIV>
<DIV><BR></DIV><FONT face=arial,helvetica><FONT size=2>In a =
message dated
4/28/01 3:07:54 PM Central Daylight Time, <BR><A
href="mailto:p003520b@pb.seflin.org">p003520b@pb.seflin.org</A> =
writes:
<BR><BR><BR>
<BLOCKQUOTE
style="BORDER-LEFT: #0000ff 2px solid; MARGIN-LEFT: 5px; =
MARGIN-RIGHT: 0px; PADDING-LEFT: 5px"
TYPE="CITE">Has anyone out there tried any innovative approaches to =
sealing
cracks in <BR>soundboards on old, cheap, baby grand pianos? I'm =
thinking
about <BR>something on the order of a medium thickness CA glue, or =
some
other <BR>liquid type of material that would fill in the crack. =
<BR><BR>My
customer has an old Winter baby grand with about 10 cracks in the
<BR>soundboard, but none are very wide, not even paper thickness. =
She
doesn't <BR>want to spend much money <BR>and is willing for me to =
experiment
some. But I thought I'd better see if <BR>anyone else has =
experimented
first. <BR><BR>Wally Scherer <BR></BLOCKQUOTE><BR><BR>I use Webb =
Phillip's
LAKEONE Wood Rebuilder. The easiest away to do this is <BR>to put =
masking tale
on the soundboard over the cracks. The turn the piano <BR>upside down =
and poor
the liquid in the cracks from the bottom. Be sure to <BR>allow enough =
in all
the cracks to fill them. Any excess can stay on the <BR>bottom of the =
board,
since it isn't seen. If the customer is picky, it can be <BR>scraped =
off
later. After the epoxy dries, turn the piano over, and take off =
<BR>the tape.
Job done. <BR><BR>The wood filler is translucent. It will show up as a =
dark
streak, almost <BR>resembling a crack, on the soundboard. If you want =
to
eliminate that problem, <BR>add some saw dust to the epoxy. =
<BR><BR><BR>Willem
</FONT></FONT></BLOCKQUOTE></BODY></HTML>