<html>
<!-- BEGIN WEBMAIL STATIONERY -->
<head></head>
<body>
<!-- WEBMAIL STATIONERY noneset -->
<DIV>Hi Guys,</DIV>
<DIV>Came across a baldwin howard spinet with jack flanges that are comming unglued. I want to pull the action, but it was designed in a way I have yet to see.</DIV>
<DIV>Bolted to the plate-no struts, and these long flat metal pieces that are screwed into the wooden platform under the action.</DIV>
<DIV>Anything I should be aware of other than the usual stuff? Also , will the pianotek sticker holder work on this model?</DIV>
<DIV>Thanks,</DIV>
<DIV>RU/UP</DIV>
<!-- END WEBMAIL STATIONERY -->
</body>
</html>