<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN"> <HTML><HEAD> <META HTTP-EQUIV="Content-Type" CONTENT="text/html; = charset=Windows-1252"> <TITLE>Message</TITLE> <META content="MSHTML 5.50.4616.200" name=GENERATOR></HEAD> <BODY bgColor=#ffffff> <DIV>Greg,</DIV> <DIV>Folding Stool with Wheels- Harbor Freight #44061 . = Approximately 13" x 13" x 16" tall. The casters which are pretty poor in quality but = the whole thing cost about $8 on sale, got what I paid for.. I have worked on = it in the folded positition also, using it as a rolling kneeler. I'm 5'8" so = it may be a bit high for you.</DIV> <DIV>Hope this helps,</DIV> <DIV>Dale</DIV> <DIV></DIV> <DIV class=OutlookMessageHeader lang=en-us dir=ltr = align=left>-----Original Message----- From: = owner-pianotech@ptg.org [mailto:owner-pianotech@ptg.org] On Behalf Of Greg = Newell Sent: Wednesday, November 21, 2001 4:32 PM To: pianotech@ptg.org Subject: Re: key leveling -- crown? </DIV>Dale,     Would you care = to share any more info on this stool? Also, How tall are you? I'm wondering if = someone 6' and shrinking might benefit from this as well. Greg Dale Probst wrote: <BLOCKQUOTE TYPE="CITE"> <STYLE></STYLE> Carl,You could measure = speaking length with a rubber yardstick if you stretched it the same amount on each = string. It might take a while to get the feel but you could do it. Same with dip, = just takes practice which will yield pretty accurate results. Your method = would probably work but I haven't tried it.As to the glides, I don't change them because it will affect the = leveling. You have a good point about the wear factor but it has not caused me a = problem yet. I still have to do some fine leveling in the piano. By the way, = Harbor Freight sells a small folding stool on wheels that puts me about the = right height for key leveling and damper work on grands. Makes life a little = easier.Best,Dale</BLOCKQUOTE>-- Greg = Newell <A href="mailto:gnewell@ameritech.net">mailto:gnewell@ameritech.net</A> =   </BODY></HTML>