<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META http-equiv=Content-Type content="text/html; =
charset=iso-8859-1">
<META content="MSHTML 5.50.4616.200" name=GENERATOR>
<STYLE></STYLE>
</HEAD>
<BODY bgColor=#ffffff>
<DIV><FONT face=Arial size=2>Hi all,</FONT></DIV>
<DIV><FONT face=Arial size=2>In measuring center pins I have =
discovered that my
pins do not always increase in increments of .001 </FONT></DIV>
<DIV><FONT face=Arial size=2>They go #18 is .046</FONT><FONT =
face=Arial
size=2>#18.5 is .047 #19 is =
.048
19.5 is 49 #20 is 50 # 20.5 is =
51 # 21 is 52 =
#21.5 is
53 # 22 is 54.</FONT></DIV>
<DIV><FONT face=Arial size=2>I do not have any 22.5 pins =
but presume
that they are .055 becuase #23's are .056 and no #23.5 pins and wonder =
the size
for the #24 pins are.059 No #24.5 and then #25 is .063 and no #25.5 and =
the last
pin size 26 is .066</FONT></DIV>
<DIV><FONT face=Arial size=2>The break in size progression seems to
be between size #23.5 and size #24</FONT></DIV>
<DIV><FONT face=Arial size=2>Question 1. are my missing center pin =
sizes
available? #22.5, 23.5 and 24.5?</FONT></DIV>
<DIV><FONT face=Arial
size=2> &nbs=
p;
2. are these larger sizes used by many? {#22 and larger}</FONT></DIV>
<DIV><FONT face=Arial =
size=2>
3.At what size do you =
deide to
rebush rather than repin?</FONT></DIV>
<DIV><FONT face=Arial
size=2> &nbs=
p;
4. If larger accurate reamers were available would you think of using a =
larger
pin size?</FONT></DIV>
<DIV><FONT face=Arial size=2>Joe Goss</FONT></DIV>
<DIV><FONT face=Arial size=2>im<A
href="mailto:imatunr@srvinet.com">atunr@srvinet.com</A><BR><A
href="http://www.mothergoosetools.com">www.mothergoosetools.com</A></FO=
NT></DIV></BODY></HTML>