<!doctype html public "-//w3c//dtd html 4.0 transitional//en"> <html>   Wimblees@aol.com wrote: <blockquote TYPE=CITE>  There is no substitute for doing the job right in the first place. I have had several instances where I tried doing the easy thing, only to get burned. I have learned the hard way that the only method for eliminating sluggish action centers, and especially the wippen centers, is to repin. Yes, it's a little more time consuming, but if you tell the customer right from the start that the only way to fix the problem is to spend X number of dollars to make the repair, it will be done with, and you won't have to go back later to do it right. And that second time will cost you money. Wim</blockquote> Wim, we agree 100 % on this one. This has been my experience as well. The only thing I will add to centers now is teflon powder.... while repinning. I just find that anything else is nearly always more trouble then its worth, and at its very best a rather temporary solution. -- Richard Brekne RPT, N.P.T.F. UiB, Bergen, Norway <A HREF="mailto:rbrekne@broadpark.no">mailto:rbrekne@broadpark.no</A> <A HREF="http://home.broadpark.no/~rbrekne/ricmain.html">http://home.broadpark.no/~rbrekne/ricmain.html</A>  </html>