<!doctype html public "-//w3c//dtd html 4.0 transitional//en">
<html>
Hi Jon... The back support is one of the main reasons I have been looking
for an alternative. I generally solve that problem by useing a post just
under the front of the hammer jig. A bit clumsy but it works. I might try
your suggestion of replacing the back support. You ever used the Renner
then ?
<p>Jon Page wrote:
<blockquote TYPE=CITE><font size=+0>I've been using Wally's hammer boring
jig for a long time and see no reason</font>
<br><font size=+0>to get a different one. The back support which
came with it was not as sturdy</font>
<br><font size=+0>as I would like and i changed it to a piece of 3/4' plywood.
I have a jpg if you</font>
<br><font size=+0>want to view it. Wally's jig is 1/3 the price,
$99.00, last I knew.</font>
<p><font size=+0>Worth every penny,</font>
<br> </blockquote>
--
<br>Richard Brekne
<br>RPT, N.P.T.F.
<br>Bergen, Norway
<br><A HREF="mailto:Richard.Brekne@grieg.uib.no">mailto:Richard.Brekne@grieg.uib.no</A>
<br> </html>