<!doctype html public "-//w3c//dtd html 4.0 transitional//en">
<html>
Here's a cute idea. Works great too... and the bendable damper wire is
out of the equation with this flange.... fwtw. Notice each flange has two
screws, tightening on more then the other tilts the flange in that direction.
<br>
<p><img SRC="cid:part1.3FB77999.9A3B7412@grieg.uib.no" height=320 width=240>
<br>
<p>--
<br>Richard Brekne
<br>RPT, N.P.T.F.
<br>UiB, Bergen, Norway
<br><A HREF="mailto:rbrekne@broadpark.no">mailto:rbrekne@broadpark.no</A>
<br><A HREF="http://home.broadpark.no/~rbrekne/ricmain.html">http://home.broadpark.no/~rbrekne/ricmain.html</A>
<br><A HREF="http://www.hf.uib.no/grieg/personer/cv_RB.html">http://www.hf.uib.no/grieg/personer/cv_RB.html</A>
<br> </html>