<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN"> <HTML><HEAD> <META http-equiv=Content-Type content="text/html; = charset=iso-8859-1"> <META content="MSHTML 6.00.2900.2668" name=GENERATOR> <STYLE></STYLE> </HEAD> <BODY bgColor=#ffffff> <DIV><FONT face=Arial size=2>Yup, to the best of my knowledge, when = working with epoxy, you have your choice of three types of = non-epoxy-stick materials to use: wax paper (which I have never used - but I'm sure is a fine = non-stick material), aluminum foil, plastic wrap (saran wrap) and plastic = sheeting (various thicknesses). Aluminum foil can stick a little bit - especially = in corners, etc. but it is so darn malable. Use just a thin plastic wrap = (from the grocery store) on small parts when you don't want folds molded into the = final procuct - usually small epoxy repairs. I use plastic sheeting for most = epoxy work. Below is a picture of epoxying together long-bridge-root = laminates - set in a trough of epoxy formed with plastic sheeting. Plastic just = peels off - no problem. And it's tougher than wax paper - it won't = tear.</FONT></DIV> <DIV><FONT face=Arial size=2></FONT> </DIV> <DIV><FONT face=Arial size=2>Terry Farrell</FONT></DIV> <DIV><FONT face=Arial size=2></FONT> </DIV> <DIV><FONT face=Arial size=2><IMG alt="" hspace=0 src="cid:00d501c58df3$3c1a19c0$0201a8c0@youro0kwkw9jwc" = align=baseline border=0></FONT></DIV> <DIV><FONT face=Arial size=2></FONT> </DIV> <DIV> <DIV><FONT face=Arial size=2>> I'm sure this is old news to most = but I did an epoxy repair today and following advice I probably heard on the list, = put wax paper between the c-clamp/clamping wood block surfaces and the pieces = being glued.   No sticking, epoxy overflow was smoothed out like a = thin sheet of glass.   This was a particle board music rack on a console.  3 pieces gluing back onto the music rack, all joined together...oh joy!<BR>> <BR>> David I.<BR></FONT></DIV></DIV></BODY></HTML>