<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN"> <HTML><HEAD><TITLE>Message</TITLE> <META http-equiv=Content-Type content="text/html; = charset=iso-8859-1"> <META content="MSHTML 6.00.2900.2802" name=GENERATOR> <STYLE></STYLE> </HEAD> <BODY id=role_body style="FONT-SIZE: 10pt; COLOR: #000000; = FONT-FAMILY: Arial" bottomMargin=7 bgColor=#ffffff leftMargin=7 topMargin=7 = rightMargin=7> <DIV>I would recommend using a filler of similar density as the key wood = because when it come time to drill for new lead, it will be easier to keep the = drill bit on track - and after all, you are trying to<EM> remove</EM> weight, = right? Something like West System epoxy thickened with their #407 Low-Density = Filler works very well.</DIV> <DIV> </DIV> <DIV>Terry Farrell</DIV> <BLOCKQUOTE dir=ltr style="PADDING-RIGHT: 0px; PADDING-LEFT: 5px; MARGIN-LEFT: 5px; = BORDER-LEFT: #000000 2px solid; MARGIN-RIGHT: 0px"> <DIV style="FONT: 10pt arial">----- Original Message ----- </DIV> <DIV><SPAN class=390172621-18022006>I think I will use my 1/2 = tenon/plug cutter. It's good quality and does a good job. I had forgotten about = Webb Phillip's wood restorer that I will use as a glue and filler. It = should be OK for lead removing.</SPAN></DIV> <DIV><SPAN class=390172621-18022006></SPAN> </DIV> <DIV><SPAN class=390172621-18022006>I was finally able to find a = 15mm good tenon/plug cutter on the net for about 79 Euros + shipping and duty... = :-(</SPAN></DIV> <DIV><SPAN class=390172621-18022006></SPAN> </DIV> <DIV><SPAN class=390172621-18022006>Marcel</SPAN></DIV></BLOCKQUOTE></BODY></HTML>=