<HTML>In a message dated 4/15/03 7:50:22 PM Central Daylight= Time, PatchWick@aol.com writes: <BLOCKQUOTE TYPE=CITE style="BORDER-LEFT: #0000ff 2px solid; MARGIN-LEFT= : 5px; MARGIN-RIGHT: 0px; PADDING-LEFT: 5px">Hey list: I recently was called to tune a 10 year old Baldwin console. Turns out that = the pin block is totally separated from the frame (end to end and top to bot= tom). The frame posts are all loose at the top as well. The local Baldwin de= aler checked with the factory (now owned by Gibson) to see if they would rep= lace/repair this piano under the original warantee. Turns out that not only = will they NOT honor this warantee but that the warantees on all the brand ne= w Baldwins on his sales floor were null and void as well. Any thoughts? Thanks will wickham </BLOCKQUOTE><B= R> Somehow that doesn't sound right, because if it is, I think every Baldwin de= aler in the country would be turning in their pianos tomorrow, and every Bal= dwin customer with a complaint would be filing a law suit. I don't think tha= t is what Gibson wants. But, I could be wrong. Wim </HTML>