<!DOCTYPE html PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN"> <html> <head> <meta http-equiv="Content-Type" content="text/html;charset=ISO-8859-1"> <title></title> </head> <body text="#000000" bgcolor="#ccccff"> Hello Rick, I can supply pliers for removal of upright and grand hammers.  The left photo shows the pliers with the die for pressing out grand hammer shanks.  On the right you can see the attachment that replaces the die for use in uprights.  This is a new, heavy duty German tool with tons of leverage for ease of operation. Available only from - you guessed it... Jurgen Goering Piano Forte Supply <a class="moz-txt-link-abbreviated" href="http://www.pianofortesupply.com">www.pianofortesupply.com</a> <img src="cid:part1.04090503.08060505@pianofortesupply.com" alt=""><img src="cid:part2.03090200.00060404@pianofortesupply.com" alt=""> <hr width="90%" size="4"> > Thanks Jon, but the ones I want are more like a grip type of pliers. > -------------- Original message from Jon Ralinovsky <a class="moz-txt-link-rfc2396E" href="mailto:ralinoj@muohio.edu"><ralinoj@muohio.edu></a>: -------------- > >> Hi Rick, >> Try Schaff page 43, #130A/B. >> >> Respectfully, >> Jon >> >> > >>Hi List, > >>Anybody know where I can get a set of hammer shank /head pliers? The > >>ones for removing heads on uprights etc. Looked in Schaff and other >> >suppliers and can't find em. >> > > >>Thanks, >> >Rick Ucci/Ucci Piano </body> </html>