<html>
David: It's a wipe it on wipe it off type of operation, we have never had
a problem with ant of the glue joints.<br>
Roger<br><br>
<br>
At 10:43 AM 8/13/02 -0700, you wrote:<br>
<blockquote type=cite class=cite cite><font size=2>Roger: I thin=
k
that's okay on keys with plastic tops but I wouldn't use it with
ivory. I just prefer to keep all moisture away from water soluble
glue joints.</font><br>
<br>
<font size=2>David Love</font>
<dl>
<dd>----- Original Message -----
<dd>From:</b> <a href="mailto:baldyam@sk.sympatico.ca">jolly roger</a>
<dd>To:</b> <a href="mailto:pianotech@ptg.org">pianotech@ptg.org</a>
<dd>Sent:</b> August 13, 2002 8:39 AM
<dd>Subject:</b> Re: Cleaning keys again<br><br>
<dd>Hi David,
<dd> =
I used to use a scraper, as that was the method taught. Now I
use the Fantastic for the sides, it just cuts through that black crud,
and finger grease. No material is removed, and it works well
getting the dirt from under the key lip, so the fronts also look clean.
One cleaner to do the tops, sides and fronts.
<dd>Rubber gloves are recommended, as it is hard on the skin.
<dd>Regards Roger<br><br>
<br><br>
<dd>At 08:03 AM 8/13/02 -0700, you
wrote:<blockquote type=cite class=cite cite><font size=2>
<dd>I think a disc sander is a bit dangerous. It's too easy to
reduce the width of the key. Just scrape them with a small scraper
or a razor blade. </font>
<dd> <font size=2>
<dd>David Love</font>
<dd>----- Original Message -----
<dd>From: <a href="mailto:Wimblees@AOL.COM">Wimblees@AOL.COM</a>
<dd>To: <a href="mailto:pianotech@ptg.org">pianotech@ptg.org</a>
<dd>Sent: August 13, 2002 7:12 AM
<dd>Subject: Re: Cleaning keys again<br><br>
<font face="arial" size=2>
<dd>In a message dated 8/13/02 4:05:29 AM Central Daylight Time,
<a href="mailto:collin.s@skynet.be">collin.s@skynet.be</a> writes:
<br><br>
<br><br>
<br><br>
<blockquote type=cite class=cite cite>
<dd>Hi List. <br><br>
<dd>Thanks to all for the useful great input.
<dd>So may I ask again what about cleaning the dirty wood of the keys
(not the keytops, this has just been fully discussed) ? <br><br>
<dd>Best regards <br><br>
<dd>Stéphane Collin. </blockquote><br><br>
<dd>I sand them with a disc sander. <br><br>
<dd>Wim</font><font face="arial"> </font>
</dl></blockquote></blockquote>
<x-sigsep><p></x-sigsep>
Roger</html>