<!doctype html public "-//W3C//DTD W3 HTML//EN"> <html><head><style type="text/css"></style><title>Re: Agraffes</title></head><body> <div>Terry, Roger and list,</div> <div><br></div> <div>Included below is a drawing of the agraffe cutter profile we have been using for the past few years.</div> <div><br></div> <div><img src="cid:a05010401b6fc79bf853f@[210.23.147.64].1.0"></div> <div>We fax this drawing through to our local tool and cutter grinding man, ordering four at a time (double ended). As Roger said earlier, you cut from both sides of the agraffe. We use a small milling machine with depth stop control, to ensure that we end up with a donut shape in the centre of the agraffe. The easy way to check this is to cut a test agraffe in half.</div> <div><br></div> <div>Regards,</div> <div><br></div> <div>Ron O</div> <div>-- <br> <br> _________________________<br> <br> Website:  http://www.overspianos.com.au<br> Email:      mailto:ron@overspianos.com.au<br> _________________________</div> </body> </html>