<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META http-equiv=Content-Type content="text/html; charset=iso-8859-1">
<META content="MSHTML 6.00.2800.1126" name=GENERATOR>
<STYLE></STYLE>
</HEAD>
<BODY bgColor=#ffffff>
<DIV>Hi Phil,</DIV>
<DIV>I took a screwdriver, smaller than the width of the screw portion. I ground
two points on the outside edge, then I positioned it on the brass of the broken
agraffe, tapped it and turned. I was lucky, as I didn't even lubricate, as
someone suggested.</DIV>
<DIV>Good luck.</DIV>
<DIV>Regards,</DIV>
<DIV>John M. Ross<BR>Windsor, Nova Scotia, Canada<BR><A
href="mailto:jrpiano@win.eastlink.ca">jrpiano@win.eastlink.ca</A></DIV>
<BLOCKQUOTE dir=ltr
style="PADDING-RIGHT: 0px; PADDING-LEFT: 5px; MARGIN-LEFT: 5px; BORDER-LEFT: #000000 2px solid; MARGIN-RIGHT: 0px">
<DIV style="FONT: 10pt arial">----- Original Message ----- </DIV>
<DIV
style="BACKGROUND: #e4e4e4; FONT: 10pt arial; font-color: black"><B>From:</B>
<A title=rinkyd@pacbell.net href="mailto:rinkyd@pacbell.net">Phil
Frankenberg</A> </DIV>
<DIV style="FONT: 10pt arial"><B>To:</B> <A title=pianotech@ptg.org
href="mailto:pianotech@ptg.org">pianotech</A> </DIV>
<DIV style="FONT: 10pt arial"><B>Sent:</B> Tuesday, February 04, 2003 12:44
PM</DIV>
<DIV style="FONT: 10pt arial"><B>Subject:</B> broken agraffe</DIV>
<DIV><BR></DIV>
<DIV><FONT face=Arial size=2>I am struggling with a frozen agraff on a
Steinway D. Has anyone tried heating the stud ,say with a soldering iron? Any
suggestions would be appreciated. When it broke it left a peak across the
center making it extremely difficult to drill down the center for an ez
out. I managed a slightly off center hole but it's not budging.
Thanks.</FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2>Phil Frankenberg</FONT></DIV>
<DIV><FONT face=Arial size=2>Csuc Chico
Ca.</FONT></DIV></BLOCKQUOTE></BODY></HTML>