<HTML><FONT FACE=arial,helvetica><FONT SIZE=2>In a message dated 7/3/01 1:44:11 AM Central Daylight Time,
<BR>baldyam@sk.sympatico.ca writes:
<BR>
<BR>
<BR><BLOCKQUOTE TYPE=CITE style="BORDER-LEFT: #0000ff 2px solid; MARGIN-LEFT: 5px; MARGIN-RIGHT: 0px; PADDING-LEFT: 5px">Hi Wim,
<BR> There is always the option to drill out the hole and plug, use
<BR>epoxy to secure. Bin thar' done dat', and 10yrs later it is still working
<BR>fine.
<BR>Regards Roger.
<BR>
<BR></BLOCKQUOTE></FONT><FONT COLOR="#000000" SIZE=3 FAMILY="SANSSERIF" FACE="Arial" LANG="0">
<BR>
<BR>Roger
<BR>
<BR>That will fix the problem with the pin that has the most oil in it. The
<BR>problem, as Tom said, is that the oil is getting to the other holes. So
<BR>unless you drill out all the pins in a two or three note areas, the oil will
<BR>never go away, and infect the other pins. But your idea is a good one.
<BR>
<BR>Willem </FONT></HTML>