<!DOCTYPE HTML PUBLIC "-//W3C//DTD W3 HTML//EN"> <HTML> <HEAD> <META content=text/html;charset=iso-8859-1 = http-equiv=Content-Type> <META content='"MSHTML 4.72.3110.7"' name=GENERATOR> </HEAD> <BODY bgColor=#ffffff> <DIV><FONT color=#000000 size=2>Ted;</FONT></DIV> <DIV><FONT color=#000000 size=2></FONT> </DIV> <DIV><FONT color=#000000 = size=2>        If the pin is far enough away from the plate, put an old worn out or # 3 = tuning pin tip on your tuning hammer and place it on top of the broken pin.  = Then give it a couple of good wacks with a hammer. Not hard enough to drive the = pin in any more.  Then push down on the tuning pin tip with the heel of your = hand and turn the pin out.  /works like a charm.  </FONT></DIV> <DIV><FONT color=#000000 size=2></FONT> </DIV> <DIV><FONT color=#000000 size=2>Hope it works for you</FONT></DIV> <DIV><FONT color=#000000 size=2>Ray Hopland = Calgary</FONT></DIV></BODY></HTML>