<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN"> <HTML><HEAD> <META http-equiv=Content-Type content="text/html; = charset=iso-8859-1"> <META content="MSHTML 6.00.2800.1400" name=GENERATOR> <STYLE></STYLE> </HEAD> <BODY bgColor=#ffffff> <DIV><FONT face=Arial size=2>I am in the process of repinning all = action centers on a set of wippens, and flanges on the back-action. I like using the = long Renner pinning wire. Unfortunately, in the range of sizes I need to work = with, Renner only offers wire in 0.05 millimeter increments. This fairly = closely compares to 0.002-inch increments. If I use the Renner wire, and 1.30 mm = wire (about 0.051-inch) is just a tad too loose - it would be ideal = to use 1.325 wire (which would be roughly equal to a 0.052-inch), but = unfortunately, Renner only offers their wire in the next size increment at 1.35 mm. </FONT></DIV> <DIV><FONT face=Arial size=2></FONT> </DIV> <DIV><FONT face=Arial size=2>My question is this - does jumping up = 0.05 mm (or 0.002-inch) significantly increase the risk of splitting the birdseye? Obviously, if I used the regular little individual center pins, I could = limit the jump to 0.025 mm (0.001-inch). Is this a big deal or = what?</FONT></DIV> <DIV><FONT face=Arial size=2></FONT> </DIV> <DIV><FONT face=Arial size=2>Terry = Farrell</FONT></DIV></BODY></HTML>