<!doctype html public "-//w3c//dtd html 4.0 transitional//en"> <html> <body bgcolor="#D8D0C8"> Does anyone have trouble with the clamp on device for the extra outlet that is supplied with the new systems??? I can't get it to work without allot of effort to get it to bite into the power wire (maybe I'm doing something wrong) <br>joe morocco <br>needham ma <p>David Nadworny wrote: <blockquote TYPE=CITE><style></style> Ron, In addition to the power screwdriver with 1/4" magnetized nut driver and extras of hardware and clamps typically found in Dampp-Chaser products, I also include: 1/4" manually-operated magnetized nut driver with thin-walled head, for the rod clamps (Dampp-Chaser can provide this);2 sizes of nylon cable ties;2 colors of electrical tape (to secure the plug to the wall outlet to prevent its accidental removal);small hammer that fits a combination handle;extra 3-way outlet adapter. Hope this helps. David Nadworny RPTMedford, MA</blockquote> </body> </html>