<DIV>Hi All,</DIV>
<DIV>&nbsp;</DIV>
<DIV>Is it possible for jack center pins to be bent on a hard blow? I service a Bergman TG150 (5'0") that is played very hard, and some of the jack pinning is getting tighter. At first I thought it might be tight bushings or an adult beverage spilled inside (bar scene), but I'm thinking the pins may be bending. The piano is 7 months old. I don't think the problem is a pin plating problem or graphite in the bushing felt.</DIV>
<DIV>&nbsp;</DIV>
<DIV>Dave Davis</DIV>