<html> <body> I support the pinblock and drive if the torque is OK.  If not I tape under the pin hole and treat with CA glue. Andrew Anderson At 12:39 PM 12/19/2005, you wrote: <blockquote type=cite class=cite cite="">What method<img src="cid:7.0.0.16.0.20051219140735.01d9fdd8@sbcglobal.net.1" width=19 height=19 alt="Sleeping half-moon emoticon"> do you use for setting tuning pins, particularly one that "jumps" on an S&S grand? </blockquote></body> </html>