<html>
<body>
Thanks, Jason. Just wondering. <br><br>
Avery <br><br>
At 11:16 PM 3/15/04, you wrote:<br>
<blockquote type=cite class=cite cite><font face="arial" size=2>In ET,
G#4 is 415.3 cycles per second. That would be 100 cents flat of A4. A-415
is slightly flatter than that, so 101.3 is about right.<br>
</font>
<dl>
<dd>----- Original Message ----- <br>
<dd>From:</b> <a href="mailto:avery@ev1.net">Avery Todd</a> <br>
<dd>To:</b> <a href="mailto:pianotech@ptg.org">Pianotech</a> <br>
<dd>Sent:</b> Monday, March 15, 2004 8:39 PM<br>
<dd>Subject:</b> Re: Beats vs cycles vs cents<br><br>
<dd>Sarah, <br><br>
<dd>Just wondering, but why then do "they" say that to tune to
A-415, <br>
<dd>one's ETD should be set to 101.3 cents offset? Have I understood
<br>
<dd>wrong? <br><br>
<dd>Avery <br><br>
<dd> <br>
<blockquote type=cite class=cite cite>
<dd><font face="arial" size=2>And yes, there are 100 cents between one
half step and the next,<br>
</font>
<dd> <br>
<dd><font face="arial" size=2>Peace,<br>
<dd>Sarah<br>
</font>
<dd> <br>
<dd> <br>
<dd> <br>
<dd>----- Original Message -----
<dd>From: <a href="mailto:jjgranas@zigzag.pl">Jean-Jacques Granas</a>
<dd>To: <a href="mailto:pianotech@ptg.org">pianotech@ptg.org</a>
<dd>Sent: Monday, March 15, 2004 5:44 PM
<dd>Subject: Beats vs cycles vs cents<br><br>
<dd><font face="arial" size=2>Hi Joseph,</font>
<dd>
<dd><font face="arial" size=2>So if I understand this right, cents are
units along a scale leading from one half tone to the next, while beats
are pegged to the specific unison's frquency. Did I understand this
right?</font>
<dd>
<dd><font face="arial" size=2>Peace
<dd>jj</font></blockquote>
</dl></blockquote></body>
</html>