<!doctype html public "-//w3c//dtd html 4.0 transitional//en">
<html>
David Love wrote:
<br>
<br> Richard Brekne wrote: >>... But I am a bit wary of definitions
as to what "hammers whose weights fall outside of the boundaries
that allow for a good match of >>weight to leverage" means... >For
the purposes of our discussion that would mean hammer weights that combined
with a certain leverage required excessive front >weight
<p>>David Love
<p>Grin.... This clears things up entirely. :) Excessive Front
weight.. yes. What exactly is our standard for that then ? Stanwoods Maximums
ok ?
<br><font size=-1></font> --
<br>Richard Brekne
<br>RPT, N.P.T.F.
<br>UiB, Bergen, Norway
<br><A HREF="mailto:rbrekne@broadpark.no">mailto:rbrekne@broadpark.no</A>
<br><A HREF="http://home.broadpark.no/~rbrekne/ricmain.html">http://home.broadpark.no/~rbrekne/ricmain.html</A>
<br> </html>