<html>
<body>
Terry -<br>
Two questions - What kind of bass strings are these? and what kind
of camera equipment do you use. The quality of the photos seems
much better than Ron's...no offense intended.<br><br>
David Skolnik<br><br>
<br><br>
At 04:40 PM 5/25/2005 -0400, you wrote:<br>
<blockquote type=cite class=cite cite=""><font face="arial" size=2>I
don't know that there is anything "wrong" with using Dag or
graphite, but some, including me, don't think it is necessary. Hard maple
is a rather lubricious wood and strings slide over it quite easily. The
photo below is of one of my bridges.<br>
</font> <br>
<font face="arial" size=2>I think most rebuilders and manufacturers use
black goop on the bridge tops because "that's what you're supposed
to do".<br>
</font> <br>
<font face="arial" size=2>Terry Farrell<br>
</font> <br>
<img src="cid:6.2.1.2.2.20050525223728.0234a988@mail.optonline.net.1" width=520 height=284 alt="[]">
<br>
<dl>
<dd><font face="arial" size=2>I have a question about the bridge you made
for the Overs Kawai:<br>
<dd>the original bridge had graphite on its top, so why did you choose
not to graphite it?<br>
<dd>Is graphite a bad thing (although many manufacturers graphite their
bridges) when applied on top of bridges?<br>
</font>
<dd> <br>
<dd><font face="arial" size=2>Congratulations again, and it would be good
to hear the "beast".<br>
</font>
<dd> <br>
<dd><font face="arial" size=2>Quentin<br>
</font><br>
</dl><br>
</blockquote></body>
</html>