<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN"> <HTML><HEAD> <META http-equiv=Content-Type content="text/html; = charset=iso-8859-1"> <META content="MSHTML 6.00.2900.2523" name=GENERATOR> <STYLE></STYLE> </HEAD> <BODY bgColor=#ffffff> <DIV><FONT face=Arial size=2>I usually remove the name board (which = slides out with the action). You can then lift the keys individually and slide them = forward enough to access the front capstan screw. The rear screw is usually = accessible with the key in-place. Turn each screw about the same amount until the = hammers are level, then be sure the capstan is tight so it doesn't knock. Be = sure the sure the silk spring threads are intact or the jacks won't = rebound.</FONT></DIV> <DIV><FONT face=Arial size=2></FONT> </DIV> <DIV><FONT face=Arial size=2>Philip Jamison</FONT></DIV> <DIV><FONT face=Arial size=2>PA</FONT></DIV></BODY></HTML>