<HTML><FONT FACE=arial,helvetica><FONT SIZE=2>In a message dated 9/5/01 11:52:46 PM Central Daylight Time,
<BR>MBrat70179@AOL.COM writes:
<BR>
<BR>
<BR><BLOCKQUOTE TYPE=CITE style="BORDER-LEFT: #0000ff 2px solid; MARGIN-LEFT: 5px; MARGIN-RIGHT: 0px; PADDING-LEFT: 5px">In the past I have tried shimming the keyframe with front rail punchings. </BLOCKQUOTE>
<BR>
<BR>You are using the front rail punchings in the wrong place. Instead of between
<BR>the rail and the action, cut them in half, and put them over the screw holes,
<BR>between the rail and the keybed, but on the action side of the hole. When you
<BR>tighten the screw, the top of the rail will move away from the keys.
<BR>
<BR>Willem </FONT></HTML>