<html>
<font size=3>At 06:04 PM 08/25/2001 -0700, you wrote:<br>
</font><blockquote type=cite cite><font size=2>Roger:</font><font size=3><br>
<br>
</font><font size=2>The action is workable. The key ratio is .53
for naturals and .55 for sharps. The knuckles are 17mm and the dip
is not excessive. The caps are centered under the heels. It's
not grossly out, don't misunderstand me. The action feels
nice. I just noticed that the acceleration rate was different and
have noticed this variation periodically. In this case once the
static friction is broken the hammer begins to accelerate more quickly
than many I have weighed off. Anyway, on to the next one. I'm
tempted to try S&S parts on the next one I do, I'm glad to hear you
were happy with the quality control.</font><font size=3><br>
<br>
</font><font size=2>David
Love</font><font size=3></font></blockquote><br>
Could it be that the ones which accelerate faster also have a lower
friction or Balance Weight?<br>
Check knuckle height, there may be a noticeable difference from note to
note;<br>
another process prior to shank installation is measuring knuckle height
and<br>
grouping similar ones together.<br>
<br>
Regards,<br>
<font size=3>Jon Page, piano technician<br>
Harwich Port, Cape Cod, Mass.<br>
<a href="mailto:jon.page@verizon.net" eudora="autourl">mailto:jon.page@</a>verizon<a href="mailto:jon.page@verizon.net" eudora="autourl">.net</a><br>
<a href="http://www.stanwoodpiano.com/" eudora="autourl">http://www.stanwoodpiano.com</a><br>
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~</font></html>