<!doctype html public "-//w3c//dtd html 4.0 transitional//en"> <html> <body bgcolor="#FFFFFF"> Mark, <br>    I sure would like one if it's not too much trouble. <br>Thanks, <br>    Greg <p>Mark Story wrote: <blockquote TYPE=CITE><style></style> <font face="Arial"><font size=-1>Hi Pat,</font></font> <font face="Arial"><font size=-1>I use a rotary planer called a "Safe-T-Planer" on my drill press with a sliding table arrangement to hold the key. I have a bushing plug sized peg in the table that helps locate and hold the key, with appropriate relieves in the sliding table to allow for shoes. What led me to this was that I wanted something that used the bottom of the key as the reference surface rather than the side - which is less reliable. I can send you a digital photo if you want.</font></font> <font face="Arial"><font size=-1>Mark Story, Piano Technician</font></font> <br><font face="Arial"><font size=-1>EWU Music Dept. mail stop 100</font></font> <br><font face="Arial"><font size=-1>359-7017</font></font> <blockquote style="BORDER-LEFT: #000000 2px solid; MARGIN-LEFT: 5px; MARGIN-RIGHT: 0px; PADDING-LEFT: 5px; PADDING-RIGHT: 0px"> <div style="FONT: 10pt arial">----- Original Message -----</div> <div style="BACKGROUND: #e4e4e4; FONT: 10pt arial; font-color: black"><b>From:</b> <a href="mailto:pneely@thegrid.net" title="pneely@thegrid.net">Pat Neely</a></div> <div style="FONT: 10pt arial"><b>To:</b> <a href="mailto:pianotech@ptg.org" title="pianotech@ptg.org">pianotech@ptg.org</a></div> <div style="FONT: 10pt arial"><b>Sent:</b> Saturday, March 11, 2000 2:21 PM</div> <div style="FONT: 10pt arial"><b>Subject:</b> jig for keytops</div>  <font size=-1>List for those of you who do your own keytops  what jig do you think is best to get the keys to proper measurement for new key tops?</font></blockquote> </blockquote> </body> </html>