<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META http-equiv=Content-Type content="text/html; =
charset=iso-8859-1">
<META content="MSHTML 6.00.2800.1400" name=GENERATOR>
<STYLE></STYLE>
</HEAD>
<BODY bgColor=#ffffff>
<DIV><FONT face=Arial size=2>I've dealt with Phil Glenn at YC on =
these. <A
href="mailto:phil_glenn@yca.tzo.com">phil_glenn@yca.tzo.com</A> =
He had
been very helpful</FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2>If the piano is mid 80s to early 90s =
and the
hammers are blocking - almost guaranteed that you have expanding =
brackets. If
they have expanded alot, yes you can easily measure the expansion - =
either
measure the brackets themselves and compare, or you can measure the =
action
spread. However, I have done bracket jobs where the action spread was =
apparently
unaffected, but still when I replaced the brackets, all troubles were =
solved and
the action regulated real nice.</FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2>YC will provide the new brackets and =
reimburse up
to $250 to $300 - enough to replace the brackets, but not for a full =
action
regulation. I just got paid today, as a matter of fact, for the last =
action
bracket job I did - $1,170. They understood that it was time =
for a
full regulation, damper regulation, hammer filing, some repinning - =
basically to
go through all that stuff down thar in the action cavity and make it =
work as
good as it could.</FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2>But beware - don't sell an action =
bracket job for
$300 and think that the piano will play well without a good
regulation!</FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2>Terry Farrell</FONT></DIV>
<BLOCKQUOTE
style="PADDING-RIGHT: 0px; PADDING-LEFT: 5px; MARGIN-LEFT: 5px; =
BORDER-LEFT: #000000 2px solid; MARGIN-RIGHT: 0px">
<DIV style="FONT: 10pt arial">----- Original Message ----- </DIV>
<DIV
style="BACKGROUND: #e4e4e4; FONT: 10pt arial; font-color: =
black"><B>From:</B>
<A title=Piannaman@aol.com
href="mailto:Piannaman@aol.com">Piannaman@aol.com</A> </DIV>
<DIV style="FONT: 10pt arial"><B>To:</B> <A =
title=pianotech@ptg.org
href="mailto:pianotech@ptg.org">pianotech@ptg.org</A> </DIV>
<DIV style="FONT: 10pt arial"><B>Sent:</B> Friday, June 18, 2004 =
11:13
AM</DIV>
<DIV style="FONT: 10pt arial"><B>Subject:</B> Expanding YC action =
bracket
symptoms??</DIV>
<DIV><BR></DIV><FONT face=arial,helvetica><FONT size=2 =
PTSIZE="10">Hi List,
<BR><BR>I know this topic has been dicsussed a fair amount at various =
times in
this forum. Yesterday, I went to tune a Weber WG50(about a 5' 7" =
grand I
believe) which was manufactured by Young Chang. What I found was =
a piano
so out of regulation as to be virtually unplayable. Hammers were =
blocking against the strings, and it took more than a full turn of the =
let-off
dowels to get any let-off at all. <BR><BR>I didn't get very far =
into
it, because I'd only alotted time for a normal tuning appointment. =
I did
take off the top action to check for abnormal tightness in the =
keyframe, but
it seemed to go in and out just fine. But the amount the piano =
has gone
out of regulation is of concern to me. <BR><BR>Other factors: =
The
piano was in Pennsylvania before it came to a much drier climate in =
CA, and
before it got to its current location, it stayed for some time(I think =
the
owner mentioned over a year) in storage. <BR><BR>What measurements can =
I take
to determine if it is indeed swollen brackets? After checking a =
few
sample notes, I've come to the conclusion that the piano can be =
regulated, but
I want to be sure it isn't something more egregious before I spend =
many hours
on the piano. <BR><BR>Any input would be helpful! Thanks in =
advance.
<BR><BR>Dave Stahl</FONT> </FONT></BLOCKQUOTE></BODY></HTML>