<DIV><B><I>Greg Newell <gnewell@ameritech.net></I></B> wrote:
<BLOCKQUOTE class=replbq style="PADDING-LEFT: 5px; MARGIN-LEFT: 5px; BORDER-LEFT: #1010ff 2px solid">
<P>Mark,<BR>So during the finishing process is when you re-add the missing <BR>filler and stain, right?<BR><BR>Greg Newell</P>
<P><STRONG>Hi Greg -</STRONG></P>
<P><STRONG>Yes. First I would use dyes to get the color I want, then seal them with a wash coat of shellac. If I AM gonna use filler that would be next, although oftentimes I don't use it. Then, if necessary, a few very thin toning coats (tinted shellac, usually) on miscellaneous pieces to even up the color ( and, BTW, this does NOT have to make the finish look muddy, as you earlier suggested!), then on with the coats of finish.</STRONG></P>
<P><STRONG>Mark Potter</STRONG><BR><BR><BR>At 06:06 AM 2/18/2005, you wrote:<BR>>Greg Newell <GNEWELL@AMERITECH.NET>wrote:<BR>><BR>>When those of you who do, refinish a piano do you remove the filler during<BR>>the stripping process?<BR>><BR>>Hi Greg - It is not a "goal", per se, for me. Whatever volunteers to <BR>>come out during the stripping process, as well as the rinsing and <BR>>scrubbing with maroon scotchbrite or #1 steel wool, is the extent of my <BR>>endeavors in this regard. I then sand with 150 - 220 and start the <BR>>finishing process.<BR>><BR>>No brass brushes for me...<BR>><BR>>Mark Potter<BR><BR>Greg Newell<BR>Greg's piano Forté<BR>mailto:gnewell@ameritech.net <BR><BR><BR>_______________________________________________<BR>pianotech list info: https://www.moypiano.com/resources/#archives<BR></P></BLOCKQUOTE></DIV>