<html> <body> Steve, <x-tab>        </x-tab>Try ixwebhosting.com. They have a reliability rating of some 98%. That essentially means that their never down and if by some fluke they do go down it's for an extremely short period of time. Greg Newell At 05:09 PM 8/12/2005, you wrote: <blockquote type=cite class=cite cite="">Uh-Oh...   Thanks f= or letting me know.  Just found out my host is having problems with their servers, and solution is not yet identified.  Sorry for any inconvenience.  Please try again later. Steve   On 8/12/05, Andrew and Rebeca Anderson <<a href="mailto:anrebe@sbcglobal.net">anrebe@sbcglobal.net</a>> wrote: <dl> <dd>Steve, <dd>Your website didn't come up with the link. <dd>Andrew <dd>At 12:44 PM 8/12/2005, you wrote: <blockquote type=cite class=cite cite=""> <dd>Andrew, you might consider the SuperTube (<a href="http://www.fujanproducts.com/">www.fujanproducts.com</a>) if you have noticed the need for a stiffer hammer.  My theory is that most people go shorter in search of stiffness. <dd>Nancy, the tubular shaft allows you many different gripping techniques.  Seems to me if you find a technique that works for you, that is the right one. <dd>I hope this helps -- Steve Fujan <dd>  <dd>On 8/12/05, Andrew and Rebeca Anderson <<a href="mailto:anrebe@sbcglobal.net">anrebe@sbcglobal.net</a> > wrote: <dl> <dd>I change my grip depending on what kind of pinbock situation I'm up against.  I've just started trying out the ball end Schaff sells to slide on the end of their hammers.  It is quite helpful. I use it with a 20 degree head and a short tip.  Now I need a shorter and much stiffer hammer. <dd>Andrew <dd>At 10:58 AM 8/12/2005, you wrote: <blockquote type=cite class=cite cite=""> <dd>Hi. <dd>  <dd>  <dd>I'm wondering how you all grip your tuning hammers.  Do you think the grip is crucial or is more about  the technique you use to move the hammer?  When tuning for PTG exam, is there a particular grip  that the examiner is looking for or if you do an acceptable tuning, is that all that matters?  I seem to be having difficulty trying to determine the best way to grip the hammer comfortably on certain kinds of pianos and control the amount of movement.   Do you usually stick to the same technique or do you find you have to adjust according to the type of piano you are tuning?   By the way, I use a Shaff compact extendable hammer.  I do have the book "Different Strokes" which offers a lot of suggestions but I'm curious about what you all do and hope that you might have some dialogue re: this.  <dd>  <dd>thanks,  nancy <dd><a href="http://us.rd.yahoo.com/evt=34442/*http://www.yahoo.com/r/hs= "> Start your day with Yahoo! - make it your home page </a></blockquote></blockquote> </dl> </dl></blockquote> <x-sigsep></x-sigsep> Greg Newell Greg's piano Forté <a href="mailto:gnewell@ameritech.net" eudora="autourl"> mailto:gnewell@ameritech.net</a></body> </html>