<HTML>In a message dated 8/10/2002 4:01:59 PM Pacific Daylight Time, ray@bentley.net writes: <BLOCKQUOTE TYPE=CITE style="BORDER-LEFT: #0000ff 2px solid; MARGIN-LEFT: 5px; MARGIN-RIGHT: 0px; PADDING-LEFT: 5px">Subj:Re: To Voice or Not to Voice? [was Re: Baldwin hammers] Date:8/10/2002 4:01:59 PM Pacific Daylight Time From:<A HREF="mailto:ray@bentley.net">ray@bentley.net</A> Reply-to:<A HREF="mailto:pianotech@ptg.org">pianotech@ptg.org</A> To:<A HREF="mailto:pianotech@ptg.org">pianotech@ptg.org</A> Sent from the Internet         Ray</BLOCKQUOTE>    Sorry. I guess I missed your point. To answer your first question my standard answer is, use  Ronsen with German felt. My point was often clients don't know the difference. Viva la difference! >>>>>Dale    <BLOCKQUOTE TYPE=CITE style="BORDER-LEFT: #0000ff 2px solid; MARGIN-LEFT: 5px; MARGIN-RIGHT: 0px; PADDING-LEFT: 5px"> Dale, and others, The client was specific in requesting that further voicing not be done.  It had a warm and full sound throughout.  Yes, the client is still ecstatic with the results now two years later.  As a matter of fact, recently she told me that is wonnnnnnnnnnnderful! The original post asked for a suggestion for hammers that might require minimal voicing.  While I have had many other hammer replacements that required various amounts of voicing, this is the suggestion I offered.  This is not to be construed as my standard practice. Respectfully, Ray T. Bentley, RPT Registered Piano Tuner-Technician Alton, IL ray@bentley.net www.ray.bentley.net ----- Original Message ----- From: <Kdivad@AOL.COM> To: <pianotech@ptg.org> Sent: Saturday, August 10, 2002 4:40 PM Subject: Re: To Voice or Not to Voice? [was Re: Baldwin hammers] </BLOCKQUOTE> </HTML>