<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN"> <HTML><HEAD> <META http-equiv=Content-Type content="text/html; = charset=iso-8859-1"> <META content="MSHTML 5.50.4134.100" name=GENERATOR> <STYLE></STYLE> </HEAD> <BODY bgColor=#ffffff> <DIV><FONT face=Arial size=2>The front rail pins being rusty around = the base and swollen are so tight they are hard to even turn much less pull out. = They are not drilled all the way through so removing the key frame and = driving them out from the bottom is not an option. Any tricks? I am an ex = plumber/pipefitter so I KNOW brute strength and dumb luck. I'm considering using my right = angle drill. Since the pins are oval I shouldn't have to tighten up the chuck = much to get them spinning.</FONT></DIV> <DIV><FONT face=Arial size=2>Keith R</FONT></DIV></BODY></HTML>