<html>
<body>
Terry,<br>
<x-tab> </x-tab>Many
buzzes thought to be loose ribs can actually be raced to loose nose
bolts. Check that first as it's a lot easier than crawling around on the
floor.<br><br>
Greg<br><br>
<br>
At 04:38 AM 11/6/2003, you wrote:<br><br>
<blockquote type=cite class=cite cite><font face="arial">I might need =
to
glue a buzzing rib today on a Yamaha GH1. If the buzz source is a rib,
the rib is not loose enough to insert anything between the rib and the
panel. The only thing I can think of doing would be to wick some thin CA
in between the rib top and panel bottom. But how in the world can that be
done on a grand in a home with a nice floor without flipping it over? Any
ideas? Thanks.<br>
</font> <br>
<font face="arial">This is my <i>IRATE </i>customer from last week. I am
going to take Ron N.'s advise and exhaust the possibility of a penny or
paper clip on the panel first (I've got my lights and mirrors and
search-sticks). And believe it or not, she can't be there again -
YIKES!<br>
</font> <br>
<font face="arial">Terry Farrell<br>
</font><br>
---<br><br>
Checked by AVG anti-virus system
(<a href="http://www.grisoft.com/"=
eudora="autourl">http://www.grisoft.com</a>).<br>
Version: 6.0.536 / Virus Database: 331 - Release Date:
11/3/2003</blockquote>
<x-sigsep><p></x-sigsep>
Greg Newell<br>
Greg's piano Forté<br>
<a href="mailto:gnewell@ameritech.net"=
eudora="autourl">mailto:gnewell@ameritech.net</a></body>
</html>