<html>
<font size=3>At 12:00 PM 08/23/2001 -0500, you wrote:<br>
<blockquote type=cite cite>Hi Terry,<br>
I usually use tri-wedges through out the tenor section, but<br>
there are some half peddling gains, to be had, using one flat and one
tri<br>
wedge, down to about mid F. Teble section I use flat sewn damper
felt. <br>
I think I covered the subject fairly well in my Damper articals.<br>
Criteria. mmmmmmmm Let me think. Just experience, the
customer and the<br>
piano. I know not a very good answer.<br>
But always two wedges up to and past mid C.<br>
Roger</font></blockquote><br>
For any trichord felt placed on the front higher than C it must be
short<br>
in length and not protrude between the wires. Trichord on the front
in<br>
this area produces the majority of the 'whoosh' if not trimmed.<br>
<br>
<br>
<br>
<br>
<br>
<font size=3>Jon Page, piano technician<br>
Harwich Port, Cape Cod, Mass.<br>
<a href="mailto:jon.page@verizon.net" eudora="autourl">mailto:jon.page@</a>verizon<a href="mailto:jon.page@verizon.net" eudora="autourl">.net</a><br>
<a href="http://www.stanwoodpiano.com/" eudora="autourl">http://www.stanwoodpiano.com</a><br>
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~</font></html>