<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META http-equiv=Content-Type content="text/html; =
charset=iso-8859-1">
<META content="MSHTML 5.50.4134.100" name=GENERATOR>
<STYLE></STYLE>
</HEAD>
<BODY bgColor=#ffffff>
<DIV><FONT face=Georgia size=2>You might try sizing up the birdseye =
with some
water and glue. </FONT></DIV>
<DIV><FONT face=Georgia size=2></FONT> </DIV>
<DIV><FONT face=Georgia size=2>Kpiano</FONT></DIV>
<BLOCKQUOTE dir=ltr
style="PADDING-RIGHT: 0px; PADDING-LEFT: 5px; MARGIN-LEFT: 5px; =
BORDER-LEFT: #000000 2px solid; MARGIN-RIGHT: 0px">
<DIV style="FONT: 10pt arial">----- Original Message ----- </DIV>
<DIV
style="BACKGROUND: #e4e4e4; FONT: 10pt arial; font-color: =
black"><B>From:</B>
<A title=terry@farrellpiano.com =
href="mailto:terry@farrellpiano.com">Terry</A>
</DIV>
<DIV style="FONT: 10pt arial"><B>To:</B> <A =
title=pianotech@ptg.org
href="mailto:pianotech@ptg.org">pianotech@ptg.org</A> </DIV>
<DIV style="FONT: 10pt arial"><B>Sent:</B> Monday, February 28, 2005 =
5:26
PM</DIV>
<DIV style="FONT: 10pt arial"><B>Subject:</B> Action Center Pin
Progression</DIV>
<DIV><BR></DIV>
<DIV><FONT face=Arial size=2> the Renner wire, and 1.30 mm =
wire (about
0.051-inch) is just a tad too loose - it would be ideal to =
use 1.325
wire (which would be roughly equal to a 0.052-inch), but =
unfortunately, Renner
only offers their wire in the next size increment at 1.35 mm. =
</FONT></DIV>
<DIV><FONT face=Arial =
size=2></FONT> </DIV></BLOCKQUOTE></BODY></HTML>