<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN"> <HTML><HEAD> <META http-equiv=Content-Type content="text/html; charset=US-ASCII"> <META content="MSHTML 6.00.2800.1400" name=GENERATOR></HEAD> <BODY id=role_body style="FONT-SIZE: 10pt; COLOR: #000000; FONT-FAMILY: = Arial" bottomMargin=7 leftMargin=7 topMargin=7 rightMargin=7><FONT id=rol= e_document face=Arial color=#000000 size=2> <DIV> <DIV>    <FONT size=4>Terry</FONT></DIV> <DIV><FONT size=4>    Stop</FONT><FONT size=3>.!!!!!!!!!!= ! Do not use 3- to 1 lacquer on these hammers any where. I'll post later gotta run.</FONT></DIV> <DIV><FONT size=3>   Dale</FONT></DIV> <BLOCKQUOTE style="PADDING-LEFT: 5px; MARGIN-LEFT: 5px; BORDER-LEFT: blue 2px solid"><= FONT style="BACKGROUND-COLOR: transparent" face=Arial color=#000000 size= =2>For those who have used them, or know about them,  has anyone find it <BR>necessary to lacquer Ronsen's Wurzen felt hammers? After hanging a set= on my <BR>G1 yamaha, the tone is quite nice and uniform, but lacking in power= . I'm <BR>told these hammers can be "voiced up" to some extent by deep needl= ing at <BR>about 11 &1 o'clock. Will this not "mellow" the tone? They are plenty mellow <BR>to start with. I thought that adding 3:1 ratio of lacque= r to acetone and <BR>soaking the lower shoulders until it wicks to the moulding= near the tip was <BR>the way to add fff potential.<BR>If so, what is the b= est way to do this consistently from one hammer to the <BR>next, avoiding the crown? There is an article on lacquering in this month's <BR>PTJ, but I'd = like as much feedback as I can get before I attempt this. <BR>thanks!<BR><BR>Te= rry Peterson</FONT></BLOCKQUOTE></DIV> <DIV></DIV> <DIV> </DIV> <DIV> </DIV> <DIV><FONT lang=0 face=Arial size=2 FAMILY="SANSSERIF" PTSIZE="10"= >Erwins Pianos Restorations <BR>4721 Parker Rd.<BR>Modesto, Ca 95357<BR>209-577-8397<BR>Reb= uilt Steinway , Mason &Hamlin Sales<BR>www.Erwinspiano.com</FONT></DIV></FONT></BODY></HTML>